DRYLOK Extreme Masonry Waterproofer
คุณสมบัติสินค้า:
Latex Base DRYLOK EXTREME Masonry Waterproofer is the Next Generation in waterproof coatings. Features flexible Encapsulated Polymers which squeeze into the masonry for the ultimate in waterproof protection. Specially formulated to resist mildew growth on the dry paint film with the incorporation of an environmentally friendly green biocide. Fully transferable 15 year warranty. Tested to ASTM D-7088 Resistance to Hydrostatic Pressure at 15 psi and ASTM D-6904 Resistance to Wind Driven Rain. Reduces radon gas penetration. Bright white, smooth finish Resists mildew growth on the dry paint film Resists 15 psi, equivalent to a wall of water 33 ft. high Fully transferable 15 year warranty Guaranteed to stop water, even under pressure Features flexible encapsulated polymers Reduces radon gas penetration White is tintable
หมวดหมู่ : Waterproofing , Drylok , Drylok Waterproofing , Drylok Waterproofing ,
Share
Basic Uses
Ideal for interior, exterior, above or below grade masonry walls, basement walls, retaining walls, foundations, landscape walls, cinder blocks, concrete blocks, bare concrete swimming pools, stucco and brick.
Technical Data
COMPOSITION: Latex base
SHEEN: N/A
% WEIGHT SOLIDS: 64-66%
% VOLUME SOLIDS: 55-57%
DENSITY (LBS./US GAL.): 9.8-10.0
VISCOSITY: 110-120 Ku@77ºF
pH: 9.0-9.9
COLOR: White – ready mixed formula
DRY TIME: 2 hours / To recoat: 3 hours
Note:Maximum cure and dry time will be prolonged when slightly humid and damp, cool conditions prevail.
CLEAN UP: Warm soapy water / Dispose of contaminated absorbent,container and unused contents inaccordance with local, state and federal regulations.
COVERAGE (SQ. FT./US GAL.): 75-100 sq. ft./gallon
