SikaFloor 20 Purcem, 31 kg/set (A+B+C)

USES
Sikafloor®-20 PurCem® LP may only be used by experienced professionals.
Sikafloor®-20 PurCem® LP is used as a final flooring wear layer in areas of heavy loading, high mechanical abrasion and impacts, aggressive chemical attack, thermal shocks and high temperature stresses, such as in :

• Food processing plants (wet or dry process areas, freezers and coolers, thermal shock areas)
• Chemical plants
• Laboratories
• Workshops
  

CHARACTERISTICS / ADVANTAGES

• Fluid consistency requires less labour to install than conventional heavy duty modified PU trowel grade screeds
• 
  Excellent chemical resistance. Resists a wide range of organic and inorganic acids, alkalis, amines, salts and solvents. Please refer to the Chemical Resistance Chart or consult Technical Department
• Similar coefficient of thermal expansion to concrete, allowing movement with the substrate through normal thermal cycling. It will perform and retain its physical characteristics through a wide temperature range from -40 °C (-40 °F) up to +120 °C (248 °F)
  
• Steam cleanable at 9 mm thick
  
• Non tainting / odourless
  
• VOC free
  
• High mechanical resistance. Behaves plastically subject to impact. Will deform but will not crack or debond
• 
  Slip resistance, natural textured surface provides anti-slip traction
• 
  High abrasion resistance resulting from its silica aggregate structure
• Rapid one step application. Normally, no concrete primer or sealer required
  
  Can be applied to substrates with high moisture content (7 days old or mature damp concrete)
  
• Jointless. Extra expansion joints are not necessary; simply maintain and extend existing expansion joints up through the Sikafloor® -PurCem® flooring system
  
• Easily maintained

Download Product Data Sheet: SikaFloor 20 Purcem