Low creep, high strength, high flow, high temperature epoxy grout
MasterFlow 648 is a precision epoxy resin grout, consisting of 3 components - resin, hardener and specially blended inert aggregates. On mixing, the components yield a high flow, high strength grout. The grout is designed for use even in narrow gaps under base plates and to effectively transfer all static and dynamic loads to the equipment foundation even at elevated service temperatures.
Cementitious high strength, non-shrink, iron reinforced precision grout
MasterFlow 880 is a non-shrink, iron reinforced precision grout with high early and ultimate strengths. It is formulated to provide extended working time even at high ambient temperatures when mixed and placed at any recommended consistency.
MasterFlow 880 is normally placed at a flowable consistency to completely fill voids between 10mm and 100mm.
Dual shrinkage compensated, precision grout
MASTERFLOW 870 is a cementitious, high strength, precision grout with natural aggregates. It is formulated to provide extended working time and dual stage expansion to compensate for shrinkage in both plastic and hardened states.
Non shrink, cementitious grout for use in general civil engineering works
MasterFlow 810 is a ready to use, non-shrink, natural agfgregate cementitious grout for use in general civil engineering works. MasterFlow 810 provides extended working life and high early and ultimate strengths.